Kia pride 1997 - Ignition Switch; Switch Position

IGNITION SWITCH
Ignition Switch and Anti-theft
Steering Column Lock
401
SWITCH POSITION
LOCK
The steering wheel is locked to protect
against theft. Only in this position can the
key be removed.
ACC
The steering wheel is unlocked and some
electrical accessories are operative.
ON
The warning lamps (except brake warning
lamp) can be checked before the engine
is started. This is the normal running posi-
tion after the engine is started.
4-2
Do not leave the ignition switch ON if the
engine is not running. The battery will dis-
charge.
START
Used to start the engine. The engine will
crank until you release the key; then it
returns to ON. The brake warning lamp
can be checked in this position.
NOTE
If difficulty is experienced in turning the
ignition switch, turn the steering wheel
right and left while turning the switch to
ON.
Removing the Key from the Ignition
.
Put the gearshift in First.
Set the parking brake fully.
Turn to lock position.
Remove the key.
402