Kimo Class 200 - Other Functions; A - Activation; Deactivation of the RS232; B- Serial Number Display

11. Other functions
Page 26
11.a- Activation / deactivation of the RS 232
Class 200 transmitters have a RS 232 output.
With the RS 232, you can send measurements (ASCII format) to another transmitter from Class 300.
1
> F 100
Step
Go into configuration mode (see page 2). The folder number displayed
corresponds to the last configuration
folder used.
2
> F 100
Step
Select the folder “100” and validate
with .
01
3
F 103
Step
Select the sub-folder “103” and validate
with .
>
4
Step
With and keys, select 00 to deactivate
the RS 232 output or 01 to activate. Validate
with .
>
01
5
F 103
Step
The cursor > returns to sub-folders line.
• press twice to return to reading mode.
• press once to return to another folder selection.
• with and keys, you can choose another sub-folder from the folder 100.
>
01
F 103
11.b- Serial number display
1
> F 100
Step
Go into configuration mode (see page 2). The folder number displayed
corresponds to the last configuration folder used.
2
> F 100
Step
Select the folder “100” and validate with .
3
F 105
Step
select sub-folder “105”
>
4
Step
>
The serial number of the transmitter is displayed.
The cursor > returns to sub-folders line.
• press twice to return to reading mode.
• press once to return to another folder selection.
• with and keys to choose another sub-folder from the folder 100.
04.03.2004
F 105
04.03.2004
Class 200 transmitter configuration via keypad