Kimo Class 200 - Page 33

11. Other functions
Go into configuration mode (see page 5). The folder number displayed
corresponds to the last configuration folder used.
Select the folder “300” and validate with .
Select the sub-folder “308” and validate with .
The cursor > returns to sub-folders line.
• press twice to return to reading mode.
• press once to return to another folder selection.
• with and , choose another sub-folder from the folder 300.
With keys and , enter the value in minutes of the frequency
of each purge (from 01 to 9999). Validate with .
11.c.3 -Frequency
Go into configuration mode (see page 5).
corresponds to the last configuration folder used.
The folder number displayed
Select the folder “300” and validate with .
Select the sub-folder “309” and validate with .
The cursor > returns to the sub-folders line.
• press twice to return to reading mode.
• press once to return to another folder selection.
• with and keys, choose another sub-folder from the folder 300.
With and keys, enter the value in seconds of the time-delay
required (from 00 to 60). Validate with .
11.c.4 - Time-delay
Time-delay corresponds to the advanced and retardation lead time of triggering of the relay 2 relative to
the relay 1.
1
> F 100
Step
2
> F 300
Step
01
3
F 308
Step
>
4
Step
>
200
5
F 308
Step
>
200
F 308
1
> F 100
Step
2
> F 300
Step
00
3
F 309
Step
>
4
Step
>
30
5
F 309
Step
>
30
F 309
Page 29
Class 200 transmitter configuration via keypad