Kinze 3000 - Dry Insecticide Application Rates

TM
Model 3000M0188-01
Rev. 6/11 5-7
Rate Charts
DRY INSECTICIDE APPLICATION RATES
APPROXIMATE POUNDS/ACRE AT 5 MPH FOR VARIOUS ROW WIDTHS
Meter Setting 30" Rows 36" Rows 38" Rows
CLAY GRANULES
10 4.9 4.1 3.9
11 5.4 4.5 4.3
12 6.1 5.1 4.8
13 6.9 5.7 5.4
14 7.7 6.4 6.0
15 8.5 7.1 6.7
16 9.6 8.0 7.6
17 10.7 8.9 8.4
18 11.4 9.5 9.0
19 13.1 10.9 10.3
20 14.2 11.8 11.2
21 15.5 12.9 12.3
22 16.4 13.7 12.9
23 17.2 14.3 13.6
24 18.8 15.7 14.9
25 20.9 17.4 16.5
26 23.0 19.2 18.1
27 24.1 20.0 19.0
28 25.4 21.2 20.1
29 27.8 23.2 22.0
30 29.6 24.7 23.4
SAND GRANULES
5 2.9 2.4 2.3
6 4.9 4.0 3.8
7 5.3 4.4 4.2
8 6.3 5.3 5.0
9 7.8 6.5 6.1
10 8.9 7.4 7.0
11 10.2 8.5 8.0
12 11.2 9.3 8.8
13 12.6 10.5 10.0
14 14.1 11.7 11.1
15 15.5 12.9 12.3
16 17.5 14.6 13.8
17 19.4 16.2 15.3
18 21.8 18.2 17.2
19 24.3 20.2 19.1
20 25.7 21.4 20.3
21 27.6 23.0 21.8
22 29.6 24.7 23.4
23 32.0 26.7 25.3
24 34.4 28.7 27.2
25 36.9 30.7 29.1
NOTE: Above chart represents average values and should be used only as a starting point. Granular
chemical flows through given meter opening at a nearly uniform rate regardless of roller speed. Your actual
rate will vary with specific insecticide, planting speed, and plant population. Planting speed/ground speed
has the greatest effect on application rate.
Your actual rate must be field checked with actual insecticide you are using at speed and population you are
planting. See “Checking Granular Chemical Application Rate” for additional information.