M0188-01Model 3000
5-8 Rev. 6/11
TM
Rate Charts
DRY HERBICIDE APPLICATION RATES
APPROXIMATE POUNDS/ACRE AT 5 MPH FOR VARIOUS ROW WIDTHS
CLAY GRANULES
Meter Setting 30" Rows 36" Rows 38" Rows
10 4.7 3.9 3.7
11 5.2 4.4 4.1
12 5.8 4.9 4.6
13 6.5 5.4 5.1
14 7.3 6.1 5.7
15 8.2 6.9 6.5
16 9.0 7.5 7.1
17 9.9 8.2 7.8
18 10.7 8.9 8.4
19 11.6 9.7 9.2
20 12.6 10.5 10.0
21 13.6 11.3 10.7
22 14.6 12.1 11.5
23 15.7 13.1 12.4
24 17.0 14.1 13.4
25 18.1 15.1 14.3
26 19.4 16.2 15.3
27 20.9 17.4 16.5
28 22.6 18.8 17.8
29 24.3 20.2 19.1
30 26.7 22.2 21.1
NOTE: Above chart represents average values and should be used only as a starting point. Granular
chemical flows through given meter opening at a nearly uniform rate regardless of roller speed. Your actual
rate will vary depending on specific herbicide, planting speed, and plant population. Planting speed/ground
speed has the greatest effect on application rate.
Your actual rate must be field checked with actual herbicide you are using at speed and population you are planting.
See “Checking Granular Chemical Application Rate” page for additional information.
To Next Page
Loading...
