Kioti CS2610 User Manual

4
-
4
CS2610
M46O402A
(1) Combination Switch (2) Key Switch (3) Hazard Lamp Switch
MOUNTING LOCATION KEY SWITCH
(1) Key Switch
(A) Pre-heat (B) Stop (C) ACC
(D) ON (E ) Start
M46O403A

(A)
The position "A" indicates the
"manual preheat". This position
is a self-return type, so the key
should be held there while pre-
heating. The pre-heating indication
lamp on the dash board will turn
on at the same time. Pre-heating
more than 30 seconds consecu-
tively can reduce the preheat
system’s life.
M46-EU,AU-04.indd 4 2012-01-19 오후 1:48:17

Kioti CS2610 Specifications

General

Engine Power	24.5 hp
Engine Type	3-cylinder diesel
Transmission	Hydrostatic
Drive	4WD
Gears	Infinite (2-range)
Front tire size	18x8.5-10
PTO Speed	540 RPM
Hydraulic System Type	Open center
3-Point Hitch Category	Category 1
Fuel Capacity	6.6 gal
Rear tire size	26x12.0-12
Turning Radius	8.2 feet