Kioti CS2610 User Manual

7
-
17
MAINTENANCE
7
M46O716A
CHANGING FRONT AXLE CASE OIL (N)
(1) Oil Filler Plug (2) Drain Plug
(3) Oil Check Plug
1 To drain the used oil, remove the
right and left drain plugs and lling
plug at the front axle case and drain
the oil completely into the oil pan.
2. After draining reinstall the drain
plugs.
3. Remove the oil filler plug and oil
level check plug. (commonly shared
component)
4. Add new oil to the specied level of
the check plug through the oil ller.
(Refer to “Lubrication” in the chap-
ter “Service”)
5. Tighten the oil filler plug and oil
check plug after replenishment.
6. Check the oil level after 15 minutes
and add oil as necessary.
(1) Oil Check Plug
M46O745A
Oil capacity
2.0 L (0.53 U.S.gal.)
M46-EU,AU-07.indd 17 2012-01-18 오후 6:39:46

Kioti CS2610 Specifications

General

Engine Power	24.5 hp
Engine Type	3-cylinder diesel
Transmission	Hydrostatic
Drive	4WD
Gears	Infinite (2-range)
Front tire size	18x8.5-10
PTO Speed	540 RPM
Hydraulic System Type	Open center
3-Point Hitch Category	Category 1
Fuel Capacity	6.6 gal
Rear tire size	26x12.0-12
Turning Radius	8.2 feet