Kioti CS2610 User Manual

4
-
15
DESCRIPTION OF OPERATING SYSTEM
4
P.T.O INDICATOR (IF
EQUIPPED)
M46O416A
M46O415A
4WD ENGAGED INDICATOR (IF
EQUIPPED)
This indicator shows the P.T.O en-
gagement condition. When the P.T.O
is engaged, this indicator comes on.
When the P.T.O clutch is disengaged,
this indicator goes off.

Set the P.T.O switch to the
“OFF” position in order to
start the engine.
CAUTION
This comes on to indicate 4WD en-
gagement.

The durability of the axle can
be deteriorated if only one
br a k e ped a l is d e pres s e d
while the 4WD is activated.
CAUTION
CRUISE LAMP (OPTIONAL)
1. Operating condition
Turn on the cruise switch during
driving. Then, the cruise lamp
comes on.
2. Deactivation condition
When pressing the brake pedal,
turning off the cruise switch, the
cruise lamp goes off.
M46O451A
M46-EU,AU-04.indd 15 2012-01-19 오후 1:48:35

Kioti CS2610 Specifications

General

Engine Power	24.5 hp
Engine Type	3-cylinder diesel
Transmission	Hydrostatic
Drive	4WD
Gears	Infinite (2-range)
Front tire size	18x8.5-10
PTO Speed	540 RPM
Hydraulic System Type	Open center
3-Point Hitch Category	Category 1
Fuel Capacity	6.6 gal
Rear tire size	26x12.0-12
Turning Radius	8.2 feet