1. Make sure there is no hazardous
obstacle around the tractor.
2. Make sure the parking brake is set
(1) Depress the parking brake
pedal and pull the lever up
.
(Check that the parking brake
lamp on the gauge board illu-
minates)
(2) To release the parking brake
press the brake pedals again.
(1) P.T.O Clutch Lever
(2) Range Gear Shift Lever (Hi-N-Lo)
(3) Forward / Reverse Driving Pedal
Make sure that the brake pedals
are fully depressed before pull-
ing the parking brake lever up.
IMPORTANT
(1) Parking Brake Lever (2) Brake Pedal
(A) Depressing (B) Pressing Up
M46O446A
M46O447A
To Next Page
Loading...
