20
USING YOUR ACCESSORIES
IMPORTANT: Accessory blades can only be used with the work bowl.
Installing/removing the multipurpose blade
2
Press down firmly on the blade. You will
hear a click when the accessory locks
into place.
1
Place the blade on the power shaft.
4
Remove the blade by grasping and
pulling it straight up.
3
The multipurpose blade has a leak
resistant seal, so you may leave the
blade in the bowl while pouring out
the ingredients.
NOTE: The multipurpose blade has a spill resistant seal and can be left in work bowl,
or removed before the contents are emptied.
Liquid level graphics on the side of the
bowl indicate the maximum recommended
levels for thick and thin liquids in the Food
Processor.
USING YOUR ACCESSORIES
W10529664B_01_ENv07.indd 20 8/8/14 1:56 PM
To Next Page
Loading...
