English
21
USING YOUR ACCESSORIES USING YOUR ACCESSORIES
IMPORTANT: Discs and adapters must be removed before removing bowls.
Installing/removing the prep bowl
5
After processing, remove the prep bowl
using the two finger grips.
1
To use the prep bowl, place into the
work bowl using the two finger grips.
3
Place the desired disc on the power
shaft. Do not use any blades with the
prep bowl.
4
Install the lid, aligning the tabs and
locking it into place.
2
Place the adapter on the power shaft.
NOTE: The prep bowl can be used only with the discs and the dicing kit.
W10529664B_01_ENv07.indd 21 8/8/14 1:56 PM
To Next Page
Loading...
