KLR.950 Revision: 2023-10-06
Serial numbers: 3008 – beyond
KLR.00001 – beyond
22
5.6.6: Breaker prep stroke
This parameter is only relevant on the machine set to shear. The machine set the shear against the clip
without cutting it prior to receive the bag. Usually set to 2600 and it will help to get a 90° cut.
5.6.7: Air printer time
This parameter is only relevant when a air printer is installed on the machine. This is how many time the
machine close the relay of the printer for compensate the travel of the air piston.
To Next Page
Loading...