KLR 950 - Maintenance Steps; 1: Changing Belts

KLR.950 Revision: 2023-10-06
Serial numbers: 3008 – beyond
KLR.00001 – beyond
28
6.2: Maintenance steps
6.2.1: Changing belts
Changing belts in the most common task to do on the bag closer machine. Follow these following steps
to change them:
Bottom belts
1. Turn OFF the equipment and remove completely the power cord from the machine;
2. Securely put the machine on the flat side on a workbench;
3. With a pair of nose pliers, dislodge the two (2) springs from the bottom belt holder assembly;
4. Lift the machine back up;
5. With an Allen key 5/32, remove the two (2) front bottom head screws and remove the front
plate;