KLR.950 Revision: 2023-10-06
Serial numbers: 3008 – beyond
KLR.00001 – beyond
21
5.6 : Configurations
Press CONFIGURATIONS
5.6.1: Breaker stroke
A step motor is dedicated to the breaking mechanism. The motion is given to a cam. That cam does not
allow a full rotation. Therefore, the "breaker stroke" tells how far the breaker needs to go to detach the
clip before rotating back to complete the cycle.
5.6.2: Start feeder position
At what position of the breaker on return the machine will start to feed the next clip.
5.6.3: Pause belt time
See "pause belt option" and check the box to allow the machine to use this function. When products are
really close each other, it is the time the machine stop temporarily the belts until the machine is ready
to receive the next product.
5.6.4: Bag sensor ON filter
Time in milliseconds the PLC acknowledge the bag sensor went ON.
5.6.5: Bag sensor OFF filter
Time in milliseconds the PLC acknowledge the bag sensor went OFF.
Multiple pieces have been removed to clarify the image
To Next Page
Loading...