KLR.950 Revision: 2023-10-06
Serial numbers: 3008 – beyond
KLR.00001 – beyond
4
1.0: SAFETY PRECAUTIONS
CAUTION
The equipment described in this manual is covered with fix panel (only opened with a tool) that
provide protection from electrical components and most of mechanical motions. However,
there is four (4) belts that can be exposed to the user. ALWAYS turn OFF the machine before
approaching hands from every motion part to remove a jam, service or clean the machine. Go
against this notice can result in a severe injury or death;
Special attention made to ensure that the operation of the machine is safe and convenient
without compromising the efficiency. Keeps hands away from the mechanism that break the
clips apart. Keeps hands and clothes away from the working area of the machine;
Keep hands away from the working machine. Do not force through remaining gaps;
If the system is linked to another machine or install onto another machine. Lock the electrical
box of the other machines before performing any maintenance on this equipment. Please refer
to the local regulations and laws on locking out machinery. Go against this notice can result in
a severe injury or death;
When working on the electrical components. Disconnect the equipment at the source and use
a lockout device to avoid any risk of danger. Make sure you also have the space required to
complete the work to avoid any risk of danger.
Any modifications with any aspect of the mechanical, safety, electrical design, design, or any
parts connected with the equipment will void the warranty and liability of KLR Systems. If a
change is required, contact KLR Systems for approval. All technical handling must be done by a
qualified technician or by KLR Systems;
KLR is not responsible for any abuse, mishandling, misuse, improper maintenance and repair
by owners and users;
Equipment must be supervised when operating;
Continue the next page…
To Next Page
Loading...