KLR.950 Revision: 2023-10-06
Serial numbers: 3008 – beyond
KLR.00001 – beyond
5
Safety switches: DO NOT bypass any safety components for any reason. Violation will void all
warranties and responsibility from KLR Systems. If a safety component is broken, it must be
replaced before starting the machine;
Safety panel (fix panel) or safety doors: As a safety, component does not try to remove or
unscrew them unless it is necessary for a maintenance operation. If it is the only option, use a
lockout device during this procedure and reassemble every single piece as it was when finished;
When the machine is set to interlock mod, that means the KLR.950 run command and speed is
controlled by another equipment. Careful when handling the equipment because it may start
when you do not expect it. ALWAYS keep hand away from belts and mechanisms even when
the machine is stopped.
To Next Page
Loading...