7 When the next dialog opens, choose Internet Protocol Version 4 and then click
Properties.
8 In the Properties dialog, select Use the following IPaddress and then enter a unique
IPaddress and subnet mask.
l The IP address must be unique and be part of the same subnet as the router’s
address.
l If the router is still configured with the default address, use 192.168.1.252.
l Set the subnet mask to 255.255.0.0.
9 When finished, click OK to save the work and then close all dialog boxes.
To test the connection, do the following:
1 Open a browser window.
2 Enter the address of the router.
3 When the log in page opens, set up the router as described in the topic Setting up
routing on page 27.
See also the topic, Using the router for a technician's service tool on page 13.
Maintenance
The BAC-5051E router requires no routine maintenance. If necessary, clean with a damp
cloth and mild soap.
If you encounter difficulty
If you experience difficulty with the BAC-5051E router, KMC Controls provides the following
assistance.
The KMC Controls web siteNavigate to the support section on the KMC controls web site
for the latest information for BAC-5051E router and other KMC Controls products.
www.kmccontrols.com
KMC technical supportOur distribution partners have unlimited and free access to our team
of Technical Support representatives. We provide coast-to-coast and toll-free support from
8:00 AM Eastern to 5:00 PM Pacific time.
Toll-Free Technical Support: (866) 303-4562
Safety considerations
KMC Controls, Inc. assumes the responsibility for providing you a safe product and safety
guidelines during its use. Safety means protection to all individuals who install, operate, and
service the equipment as well as protection of the equipment itself. To promote safety, we
use hazard alert labeling in this manual. Follow the associated guidelines to avoid hazards.
Section 1: Introduction KMC Controls, Inc.
12 Revision J
To Next Page
Loading...
Need help?
General