BASIC SAW OPERATIONS
For your convenience, your saw has an electric
brake. The brake is not a safety device. Never
rely on it to replace the proper use of the guard
on your saw. If the blade does not stop within
6 seconds, unplug the saw and follow the
instructions in TROUBLESHOOTING.
TO TURN SAW ON (FIG. 29)
This miter saw is equipped with an ON/OFF
trigger switch (2). With the safety lock (3)
pressed, squeeze the trigger switch to turn the
miter saw ON.
NOTE: Make the ON/OFF switch childproof.
Insert a padlock or chain with a padlock (not
included) through the hole (4) in the trigger
switch, locking the tool’s switch and preventing
children and other unauthorized users from
turning the machine on.
The miter saw is equipped with an electric
brake. When the trigger switch is released, the
electric blade brake will stop the blade within 6
seconds.
● To avoid injury, after completing a cut and
releasing the trigger switch, allow the blade
brake to activate and stop the blade before
raising the cutting head.
● To avoid injury, check and tighten the arbor
bolt periodically.
29
WARNING
!
WARNING
!
1
4
2
3
To Next Page
Loading...
