Kodak DirectView CR 825 Installation Instructions

INSTALLATION INSTRUCTIONS
10MAR06
II4825-1
Page
2 of 72
PLEASE NOTE The information contained herein is based on the experience and knowledge relating to the
subject matter gained by Eastman Kodak Company prior to publication.
No patent license is granted by this information.
Eastman Kodak Company reserves the right to change this information without notice, and
makes no warranty, express or implied, with respect to this information. Kodak shall not be
liable for any loss or damage, including consequential or special damages, resulting from any
use of this information, even if loss or damage is caused by Kodak’s negligence or other fault.
This equipment includes parts and assemblies sensitive to damage from electrostatic
discharge. Use caution to prevent damage during all service procedures.
Description Page
Table of Contents
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Necessary Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Unpacking the Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installing the Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Energizing the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Obtaining a “Session ID”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Doing the Calibration for the TOUCH SCREEN . . . . . . . . . . . . . . . . . . . . . 29
Setting the Site Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Setting the “User Name” and “Password” . . . . . . . . . . . . . . . . . . . . . . . . . 31
Installing and Setting Up Optional Features . . . . . . . . . . . . . . . . . . . . . . . . 33
Setting the “Global” Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Setting the HIS/RIS Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Adding a PRINTING DEVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Adding a STORAGE DEVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Setting the Profile Destination Configuration . . . . . . . . . . . . . . . . . . . . . . . 54
Enabling the BAR CODE READER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Setting the Requirements Fields. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Configuring the MONITOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Doing the Configuration for the Kodak DirectView CR LONG-LENGTH
IMAGING SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Storing the Setup Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Installing the Kodak REMOTE PATIENT DATA ENTRY STATION (RPDES) 62
Setting the Configuration for the RPDES . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Kodak DirectView CR 825 Specifications

General

Brand	Kodak
Model	DirectView CR 825
Category	Medical Equipment
Language	English