INSTALLATION INSTRUCTIONS Installation
10MAR06
II4825-1
Page
62 of 72
Installing the Kodak REMOTE PATIENT DATA ENTRY STATION (RPDES)
Important
• The site must not use the Dynamic Host Control Protocol (DHCP). DHCP changes the IP
address of the RPDES or the Kodak DirectView REMOTE OPERATIONS PANEL (ROP)
for the following conditions:
– “Site System Shutdown”
– “Site Boot”
– “Site License Expiration”
• The site must provide an IP address that does not change the application computer for
the RPDES.
• The RPDES is an option purchased by the customer.
1 Check:
• system is connected to the site network
• computer must have:
– Microsoft INTERNET EXPLORER 5.0 or higher installed
– Windows 98 or Windows NT 4.0 OPERATING SYSTEM
• options for the RPDES must be actuated from the OPTIONS DISKETTE
• KEYBOARD and MOUSE
2 Insert the OPTIONS DISKETTE.
3 Install the option for the RPDES through the “Upgradeable Options” screen.
To Next Page
Loading...
Need help?
General
