Additional Service Procedures
SM8720-1 – 15APR10 65
Using the “HIDDEN MENU” of the CAMERA
Displaying the “HIDDEN MENU”
Dangerous Voltage
[1] De-energize the CAMERA.
[2] Insert the MEMORY CARD into a CARD READER/WRITER.
[3] Make a folder with the name “HiddenMenu” on a blank MEMORY CARD.
[4] Remove the MEMORY CARD from the CARD READER.
[5] Insert into the CAMERA:
• MEMORY CARD
• BATTERIES that have a full charge
[6] Energize the CAMERA.
[7] If “Set Date & Time” displays, select “Cancel”.
[8] Press:
• “menu” BUTTON
• 4-WAY BUTTON to the right to select “Setup”
• 4-WAY BUTTON up one time to select “About”
•“OK” BUTTON
[9] Check that the firmware version displays.
[10] Press:
• press and hold the “delete” BUTTON
• 4-WAY BUTTON to the right
[11] Release the BUTTONS.
[12] Check that the LCD displays “HIDDEN MENU” and options.
[13] To quit, press the 4-WAY BUTTON left 2 times.
[14] De-energize the CAMERA.
[15] Remove the MEMORY CARD from the CAMERA.
Checking for the Firmware Version and the Type of LCD
[1] Do Step 1 - Step 12 of Displaying the “HIDDEN MENU”.
[2] Select “FIRMWARE VERSION” from the “HIDDEN MENU”.
[3] Press the “OK” BUTTON.
[4] Record the type of LCD.
[5] To qu i t, d o Step 13
- Step 15 of Displaying the “HIDDEN MENU”.
To Next Page
Loading...
