Adjustments
SM8720-1 – 15APR10 45
MAIN BOARD: Memory - “Serial Number”
Dangerous Voltage
Prerequisites:
None
To Check:
[1] Do Step 2 - Step 7 of the procedure “To Adjust”.
[2] Click [Read].
[3] Check the “USB Serial Number” field for the serial
number.
[4] Click [OK].
Purpose: To set the serial number.
Do When: After installing a new MAIN BOARD.
Specification: The software displays “Successfully Writing ID”.
Special Tools: • Computer with a MEMORY CARD READER/WRITER
• BATTERIES with a full charge
To Next Page
Loading...
