20
Chapter 2
Liveview—Framing with the Camera
Screen
When you turn on Liveview, the camera screen displays a live image of what the
lens sees. Use the camera screen to frame your subject.
1 Turn the Mode dial to any Still position.
The camera screen displays a mode
description for a few seconds. To
interrupt the description, press .
2 Press the OK button to turn on Liveview.
3 Frame your subject in the camera screen.
4 Press the Shutter button half-way to set
the exposure and focus, then continue
pressing completely down to take the
picture.
5 To turn off Liveview, press the OK button.
NOTE: Liveview quickly depletes battery power.
To conserve battery power, turn off
Liveview and use the Viewfinder to frame
your subject.
To change the Liveview setting so that it is on whenever the camera is on, see
page 51.
Using the Viewfinder
When using the viewfinder to capture close
subjects (3 feet or less), keep the subject
below the parallax marks. For even more
accurate framing results, turn on Liveview.
(Liveview depicts what the lens “sees.”)
OK
Mode dial
Parallax
marks
Auto
focus
zone
To Next Page
Loading...
Need help?
General
Weight and Dimensions
