Kodak EasyShare DX4530

52
Chapter 6
Setting Video Out
Video Out matches the camera’s video signal to the standard for your location.
Video Out must be set correctly to run a slide show on a television or other
external device (see page 41).
1 Press the Menu button.
2 Press to highlight Setup , then press the OK button.
3 Press to highlight Video Out , then press the OK button.
4 Press to highlight an option:
NTSC—used in most countries except
those in Europe and China. The United
States and Japan use NTSC.
PAL—used in Europe and China.
5 Press the OK button to accept the change.
6 Press the Menu button to exit the menu.
This setting remains until you change it.
Selecting a Language
You can display menus and screen messages in different languages.
1 Press the Menu button.
2 Press to highlight Setup , then press the OK button.
3 Press to highlight Language , then press the OK button.
4 Press to highlight an option, then
press the OK button.
5 Press the Menu button to exit the menu.
Text is displayed in the selected language.
This setting remains until you change it.