50
Chapter 6
Changing the Print Quantity Default
The Default Print Quantity setting determines the value that is displayed on the
Share Print screen (page 46). The default value is 1.
1 Press the Menu button.
2 Press to highlight Setup , then press the OK button.
3 Highlight Default Print Quantity , then press the OK button.
4 Press to indicate the new default
quantity, then press the OK button.
5 Press the Menu button to exit the menu.
This setting remains until you change it.
Turning Off Quickview
After you take a picture or video, Quickview displays it on the camera screen
for approximately 5 seconds (see page 21 and page 34). To save battery
power, turn off Quickview.
1 Press the Menu button.
2 Press to highlight Setup , then press the OK button.
3 Press to highlight Quickview , then press the OK button.
4 Press to highlight Off, then press the
OK button.
5 Press the Menu button to exit the menu.
The picture is not displayed on the
camera screen after you take it. To see
the picture or video, press the Review
button. This setting remains until you
change it.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
