Kodak EasyShare DX4530 User Manual

71
Chapter 10
Shutter button does
not work.
Camera is not
turned on.
Turn on the camera
(page 7).
The camera is
processing a
picture; the ready
light (near the
viewfinder) is
blinking.
Wait until the light stops blinking
before attempting to take another
picture.
The card or internal
memory is full.
Transfer pictures to your computer
(page 59), delete pictures from the
camera (page 38), switch storage
locations (page 11), or insert a
card with available memory
(page 10).
Stored pictures are
damaged.
The card was
removed when the
ready light was
blinking.
Make sure the ready light is not
blinking before removing the card.
Part of the picture
is missing.
Something was
blocking the lens
when the picture
was taken.
Keep hands, fingers, or other
objects away from the lens when
taking pictures.
Your eye or the
picture was not
centered correctly
in the viewfinder or
camera screen.
Leave space around subject when
centering picture in viewfinder or
camera screen.
Problem Cause Solution

Kodak EasyShare DX4530 Specifications

General

Megapixel	5 MP
Sensor type	CCD
Digital zoom	3.3 x
Optical zoom	3 x
Combined zoom	10 x
Focal length range	8 - 24 mm
Metering	automatic: multi-pattern TTL-AE
Interface	Dock Compatibility - KODAK EASYSHARE Camera Dock I, II and KODAK EASYSHARE Printer Dock 4000
Cable type	1 x A/V cable, 1 x USB cable
Minimum RAM	64 MB
Minimum processor	233 MHz
Dimensions (WxDxH)	111 x 66 x 39 mm
Camera shutter speed	1/2-1/1700 s
Minimum storage drive space	200 MB
Minimum system requirements	CD-ROM USB
Focal length (35mm film equivalent)	38 - 114 mm
Viewfinder type	Optical
Internal memory	32 MB
Compatible memory cards	mmc, sd
Display diagonal	1.8 \
I/O ports	1 x USB 1 x composite video/audio output 1 x docking station 1 x DC power input
Bundled software	KODAK EASYSHARE Software
Self-timer delay	10 s
Tripod mounting supported	Yes
Product color	Silver
Flash modes	Red-eye reduction

Weight and Dimensions

Weight	210 g