Kodak EasyShare DX4530 User Manual

81
Chapter 10
Ready light glows
steady red.
Camera’s internal
memory or card is
full.
Transfer pictures to your
computer (page 59), delete
pictures from the camera
(page 38), switch storage
locations (page 11), or
insert a card with available
memory (page 10).
Camera processing
memory is full.
Wait. Resume picture taking
when the light turns green.
Your card is
read-only.
Change your storage location
to internal memory
(page 11), or use a different
card.
Ready light blinks
green.
Camera is starting up
or picture is being
saved.
Camera is operating
normally.
Ready light blinks
yellow.
Flash is not charged. Wait. Resume picture taking
when the light stops blinking
and turns green.
Auto exposure or
auto focus are not
locked.
Release the Shutter button
and recompose the picture.
Problem Cause Solution

Kodak EasyShare DX4530 Specifications

General

Megapixel	5 MP
Sensor type	CCD
Digital zoom	3.3 x
Optical zoom	3 x
Combined zoom	10 x
Focal length range	8 - 24 mm
Metering	automatic: multi-pattern TTL-AE
Interface	Dock Compatibility - KODAK EASYSHARE Camera Dock I, II and KODAK EASYSHARE Printer Dock 4000
Cable type	1 x A/V cable, 1 x USB cable
Minimum RAM	64 MB
Minimum processor	233 MHz
Dimensions (WxDxH)	111 x 66 x 39 mm
Camera shutter speed	1/2-1/1700 s
Minimum storage drive space	200 MB
Minimum system requirements	CD-ROM USB
Focal length (35mm film equivalent)	38 - 114 mm
Viewfinder type	Optical
Internal memory	32 MB
Compatible memory cards	mmc, sd
Display diagonal	1.8 \
I/O ports	1 x USB 1 x composite video/audio output 1 x docking station 1 x DC power input
Bundled software	KODAK EASYSHARE Software
Self-timer delay	10 s
Tripod mounting supported	Yes
Product color	Silver
Flash modes	Red-eye reduction

Weight and Dimensions

Weight	210 g