A-61550 July 2008 9
5. When the installation is complete, the Installation Completed
window will be displayed.
6. Click Finish.
Linux operating systems Install the driver software before connecting the scanner to your PC.
NOTES:
• Depending on the operating system you are installing on (Ubuntu,
Fedora, or SUSE) the following procedures may be slightly different.
• Kodak Scanner software requires QT3. Verify that your system have
these installed (e.g., Fedora: Applications> Add/Remove
Software).
• You must be a super user to install the software.
1. Insert the Kodak Scanner installation CD in the CD-ROM drive of
your computer. The installation program starts automatically.
2. Open a terminal.
3. Change the directory to the CD folder.
4. Change the directory to the linuxx86 directory.
NOTE: On Ubuntu operating systems you may need to copy the
linuxx86 folder to the desktop and change the permissions
on the setup script using: chmod u+x setup
5. Run ./setup and follow the prompts.
6. When finished, press Enter to exit.
To Next Page
Loading...
