16 A-61550 July 2008
3 Using the Scanner
This chapter provides procedures for:
• Turning the scanner power on and off
• Adjusting the input and output trays
• Preparing your documents for scanning
• Verifying your scanning installation
• Scanning documents: automatic feeding, manual feeding and
continuous feeding
Turning the scanner
on and off
• Press the button to the On (I) position.
After you turn on the scanner, wait for it to complete the self-test. When
completed, the green indicator light will remain on and constant.
Adjusting the input
and output trays
The input and output trays may be adjusted to fit different document
sizes. The input and output trays also may be folded flat up against the
scanner to save space when the scanner is not in use.
To fold the scanner trays:
• Grasp the input tray/output tray and lift it up until it rests against the
scanner front/back.
To Next Page
Loading...
