A-61550 July 2008 21
5. Click OK. This resets the software to the factory-installed default
settings. The factory default settings are set to capture black and
white images. For an i1410 Scanner one side of the document will
be scanned. For an i1420 or i1440 Scanner both sides of the
document will be scanned. The Scan Validation Tool screen will be
displayed.
6. Place some test documents into the input tray of the scanner. If you
are scanning one-sided documents or if you have a Kodak i1410
Scanner, be sure the side you want to scan is facing the input tray.
7. Click the Start Scanning icon on the Scan Validation Tool.
The documents will be scanned and displayed in the Scan
Validation Tool window.
NOTE: If the scanner is in power saver mode, a message will be
displayed that the lamps need sufficient time to warm up.
Scanning will proceed when the lamps are ready.
After the images have been displayed, your scanner installation
verification is completed.
8. Click the Close box to exit the Scan Validation Tool. The images
you scanned can be found in the TWAIN folder on the C drive. Files
will be named using this naming convention: image0000001A.jpg is
a front image; image0000001B.jpg is a back image.
9. Double-click on this file to open and view the captured image.
NOTE: Because factory default settings were used, the image may
not be optimized to meet your needs. Refer to the Image
Processing document on the CD or your scanning
application documentation for more information.
10.When testing has been completed, delete the test images.
Linux operating systems 1. Open a terminal.
2. Run ScanTWAIN.
3. Select Scan>Select Scanner from the menu bar. The Select a
Scanner dialog box will be displayed.
4. Select the desired scanner and click OK.
5. When the scanner is ready (steady green LED), place some test
documents into the input tray of the scanner and click the Scan
button.
6. After the images have been displayed, your scanner installation
verification is completed.
Application software You may also use other scanning applications. See the User’s Guide
provided with these applications for instructions on how to use the
software.
To Next Page
Loading...
