Kodak i1405 - Adjust Output Tray Positions

18 A-61550 July 2008
Adjusting the output tray The output tray has three possible positions.
• Set the output tray to the lowest position when you are scanning
long documents.
• Set the output tray to the middle position when you are scanning
letter- or A4-size documents.
• Set the output tray to the highest position with the first document stop
raised when you are scanning checks and small documents (less
than 10.2 cm/4 inches).
• Use the highest position with the second document stop raised when
you are scanning documents that are 14 cm/5.5 inches long.
To adjust the output tray:
1. Grasp the tray on each side.
2. Lift the tray up and move it up or down to the desired position.
Lowest position for
long documents
Middle position for
letter or A4 documents
Highest position
for checks and small
documents