A-61550 July 2008 11
Connecting the USB
cable
The USB cable supplied with your scanner has two different ends.
1. Attach the B end of the USB cable to the scanner USB port, located
on the back of the scanner.
2. Attach the A end of the cable to the proper USB port on your PC.
Attaching the input
and output trays
The input and output trays snap into place. The input and output trays
can also be adjusted to fit different document sizes.
Attaching the input tray
1. Locate the input tray slots on the scanner.
2. Align the input tray pins with the slots.
3. Snap the input tray into place.
To Next Page
Loading...
