32 A-61550 July 2008
Scanning your
documents
Standard paper size documents should feed easily through the
scanner.
• Place the documents you want to scan into the input tray of the
scanner. If you are scanning one-sided documents or if you have a
Kodak i1410 Scanner, be sure the side you want to scan is facing the
input tray.
Automatic feeding To scan a batch of documents, follow the guidelines for size, type,
quantity, etc., as previously described in the “Document preparation”
section. For faster throughput, feed documents into the automatic
document feeder in landscape orientation (longer side as the leading
edge).
IMPORTANT: Remove all staples and paper clips before scanning.
Staples and paper clips in documents may damage the
scanner.
1. Align the leading edges of the stacked documents.
2. Position the documents face down with the leading edge centered
in the automatic document feeder.
3. Adjust the input tray side guides.
4. Adjust the output tray position, if necessary.
5. Pull out the output tray extender, if necessary.
6. Start scanning.
To Next Page
Loading...
