A-61550 July 2008 45
5 Maintenance
Cleaning your scanner and preventative maintenance on a regular
basis is required to ensure the best possible image quality.
Some document types generate more paper dust and debris and may
require more frequent cleaning than recommended.
NOTES:
• Some debris from the rubber tires on the feed and separator modules
is normal. Tire debris does not always mean that the tires are worn or
damaged. After cleaning, inspect the tires for wear and replace the
separator module or feed module if necessary.
• When cleaning rollers/tires, allow the rollers/tires to dry completely
before scanning.
• Use only the recommended cleaning supplies.
• Do not use canned/compressed air.
• In addition to the recommended cleaning supplies, you may use a
vacuum cleaner to remove debris from the scanner.
• Using unapproved cleaning fluids or solvents may damage the
rubber tires.
To Next Page
Loading...
