5-4 A-61796 September 2014
Input Type — select one of the following options:
• Two Sided: the Scan Station will scan the front and back in a single
pass.
• One-Sided - Face Down: if you select this option, the documents
must be put in the input tray face down (the side you want to scan
facing the input tray).
• One-Sided - Face Up: if you select this option, the documents must
be put in the input tray face up (the side you want to scan facing
toward you).
Resolution (DPI) — select 100, 150, 200, 240, 300, 400 or 600 dpi.
Higher resolutions produce better quality images, but larger file sizes.
NOTE: If the Document Type is PDF, this resolution setting is ignored
because the PDF resolution setting is used.
Document Type — select one of the following options:
• Text with Graphics: the documents contain a mix of text, business
graphics (bar graphs, pie charts, etc.) and line art.
• Text: the documents contain mostly text.
• Photographs: the documents contain mostly photographs.
Cropping — select one of the following options:
• Automatic: automatically detects the border of an image and
straightens it if necessary.
• Aggressive: automatically detects the border of an image,
straightens it if necessary, and eliminates any residual black border
on any image edges. In order to achieve this, there is a possibility
that a small amount of image data from the edge of the document
may be lost.
Post Scan Rotation — select None or Automatic. If you select
Automatic, the Scan Station will analyze each document to determine
how it was fed and rotate the image to the proper orientation.
To Next Page
Loading...
