Kohler KD 625/2 User Manual

- 13 -
KD 625-2 Workshop Manual_cod. ED0053029380_1° ed_ rev. 00
2
Discharged battery
Cable connection uncertain or
incorrect
Faulty starting switch
Faulty starting motor
ELECTRIC
SYSTEM
MAINTENANCE
INJECTION
LUBRICATION
CIRCUIT
POSSIBLE CAUSE
Inadequate performance
High noise level
Overheats
PROBLEM
Engine does not start
Engine starts but stops
No acceleration
Non-uniform speed
Black smoke
White smoke
Too low oil pressure
Excessive oil consumption
Excessive idle operation
Incomplete run-in
Overloaded engine
Non-conforming engine oil
Damaged, blocked or dirty injector
Injection pump valve damaged
Injector not adjusted
Hardened pump control rod
Broken or loose supplementary
start-up spring
Worn or damaged pumping element
Incorrect tuning of injection components
(delivery balancing advance)
Extra fuel control level sticking
Oil level too high
Oil level low
Oil pressure valve blocked or dirty
Oil pressure regulator not adjusted
Worm oil pump
Oil sump suction line clogged
Faulty pressure gauge or pressure
switch
Blocked draining pipe
Technical information

Kohler KD 625/2 Specifications

General

Brand	Kohler
Model	KD 625/2
Category	Engine
Language	English