K20s
what kind of correction format is transmitted.
CMR ID/RTCM2.X ID/RTCM3.X ID: Users can specify the ID for transmitting correction.
Position: Click this button to capture the coordinates for current position
Spare: This is used to the repeat station
Base Start Mode: Here contains 3 methods to start the Base, manually start base, automatically
start base by fixed point, automatically start base by current point.
Correction: Here contains the global general used correction formats including RTD,RTCM23,
RTCM30, RTCM32, CMR and SCMRx
POP Value: This value is setup for the PDOP limitation.
Status: Here will display the status for base in real-time.
Antenna Setup
The antenna parameters are configured in this page including the antenna height, measuring
method.
To Next Page
Loading...
