8.11.5 Incremental encoder / sine encoder with Hall (X1)
Encoder types (incremental or sine/cosine) that do not provide definitive information on commuta
-
tion, can be used as a complete feedback system using an additional Hall dongle.
In this case, an adapter is used for interfacing and adapting the signals (Hall dongle, ð p. 90). This
adapter is also used to connect encoders known as ComCoders.
Encoder types with a power consumption of more than 150mA can also be connected using our
external power supply (ð p. 113). For encoders that do not have integrated terminating resistors,
we offer an optional terminating adapter (ð p. 113)
If you plan to use a cable longer than 25m, please contact our application department.
Frequency limit (A, B): 250 kHz
RS422 with Hall: FBTYPE 12
Encoder with Hall: FBTYPE 11
56 SERVOSTAR
®
601...620 Instructions Manual
Electrical Installation
07/2010 Kollmorgen
SERVOSTAR 600
To Next Page
Loading...
Need help?
General
