1. PRODUCT SPECIFICATIONS
2
Field Service Ver1.0 Jun.2005
DF-606
Note
• The information herein may be subject to change for improvement without notice.
D. Maintenance
E. Machine data
F. Operating environment
Originals not allowed to be
fed
The following originals are not allowed to be used:
OHP film, blueprint master, label paper, offset master, bonded original,
high-quality paper of less than 35 g/m
2
or more than 201 g/m
2
Combination of mixed origi-
nals
Combinations of the same and different size originals is available. The following
table shows the available combination of mixed originals.
Maintenance Same as the main body.
Machine service life Same as the main body.
Power source 24V/5.1V DC (supplied from the main body)
Maximum power consumption 210W or less
Dimensions 650 (W) x 570 (D) x 170 (H) mm
Weight Approx. 22kg
Temperature 10 to 30°C
Humidity 10 to 80% RH (with no condensation)
Reference original (original with a maximum width)
A3 A4 B4 B5 A4R A5 B5R A5R B6R
Other
origi-
nals
A3 U { ———————
A4 { U ———————
B4 ~ ~ U { —————
B5 ~ ~ { U —————
A4R ~ ~ ~ ~ U { ———
A5 ~ ~ ~ ~ { U ———
B5R X X ~ ~ ~ ~ U ——
A5R X X X X X X X U —
B6R X X X X X X X ~ U
U: Single size {: Same size ~: Different size X: Mixing not allowed
—: Cannot be set
To Next Page