Korg modwave - View Menu

Menus
26
Important: if the clipboard contains multiple Slots, Paste will start with the rst selected Slot and then replace
as many Slots as necessary, regardless of how many other Slots are selected. For example, if there are four Slots
on the clipboard, and you select Slots A3 and A7 and then Paste, Slots A3, A4, A5, and A6 will be replaced with
the data from the clipboard.
Insert Before
is applies to Set List editing only. It inserts the data on the clipboard into the Set List before the selected Set List Slot,
and shis subsequent Slots to make room. Slots at the end of the Set List will be “pushed o the end” and removed.
As with Paste, if multiple Slots are selected, only the lowest-numbered selection aects the Insert Before operation;
other selections are ignored.
Duplicate
In the Main Window, this duplicates the selected item.
Select All
is selects all items shown in the front-most window, including either the main or Set List windows.
Deselect All
is clears any current selections in the front-most window.
New Set List
is creates a new Set List, with all Slots set to the Init Performance. It is available from the Main Window, when
showing either All Data or Set Lists.
Open Set List Editor
When a Set List is selected in the Main Window, this opens a Set List window for that Set List. If multiple Set Lists are
selected, it opens widows for each of them.
Select On Synth
When a Performance or Set List is selected in the Main Window, this selects the item on the modwave. When an active
Set List window is open, this selects the current Set List Slot. When an inactive Set List window is open, this selects the
Performance assigned to the Set List Slot.
Open Set List Editor
When a Set List is selected in the Main Window, this opens a Set List window for that Set List. If multiple Set Lists are
selected, it opens widows for each of them.
Global UTILITY Settings…
is opens the Global UTILITY Settings window, to edit controller settings, MIDI settings, etc. For more information,
see “Editing Global UTILITY Settings” on page 19.
Verify Sound Data…
is checks the sound data on the instrument, and corrects any issues if necessary. It is only required (and only has any
eect!) in rare circumstances. Use this only if recommended by Korg support personnel.
Preferences (Windows only)
is shows the Preferences dialog. For more information, see “Preferences” on page24.
View menu
Show Librarian
is switches the main window to show the Librarian. It’s the same as pressing the Librarian button in the upper right
of the window.