Korg MONOLOGUE - Saving Korg Monologue Programs

14
Saving a Program
WerecommendthatyousaveyourProgramonthemonologueaerediting
thesound.
 Anyeditsthatyoumaketothecurrentprogramwillbelostifyou
turnothepowerorrecalladierentprogrambeforesaving.
1.
Edit the program in Play mode.
Fordetails,referto“BasicParameterEditing”(p.15).
2.
Press the WRITE buon; the monologue will enter the Write standby
mode, and the WRITE buon will blink.
Themessage“Wheretowrite?”willappearinthedisplay.
3.
Turn the PROGRAM/VALUE knob to select the Program number where
your new sound will be saved.
TIP
PresstheEXITbuontocanceltheoperation.
4.
Press the WRITE buon once more.
TheProgramwillbesavedininternalmemory,andthemessage“Com-
plete”willappearinthedisplay.
 NeverturnothepowerwhileProgramsarebeingsaved.Doingso
maydestroytheinternaldata.