Korg MONOLOGUE - Basic Parameter Editing: VCOs; VCO 1 and VCO 2 Parameters

15
Basic Parameter Editing
Inthissection,we’llexplainthebasicparametersthatmakeupaprogram.
Thebasicparametersareassignedtotheknobsandswitchesonthefrontpanel.
VCO 1, VCO 2
VCO:VoltageControlledOscillator
Therearetwooscillatorsinthemonologue.OscillatorParametersincludethe
seingsforthepitchofthesound(OCTAVE,PITCH)andthewaveform(WAVE,
SHAPE).
ThePITCHforVCO1islockedtothemainOCTAVEswitch.Thetuningfor
theentirekeyboardissetusing“MasterTune”inGLOBALEDITmode.For
details,referto“MasterTune”(p.38).
VCO 1
WAVE switch [ , , ]
ThissetsthewaveformsforOscillator1.
Sawtooth wave:Thiswaveformisusedtocreatesoundstypicalofana-
logsynthesizers,suchassynthbassesandbrass.
Triangle wave:Thiswaveformhasarounderfeelthanthesawtoothorsquare
wave.
Square wave:Thiswaveformisusedforelectronicandwindinstrument
sounds.