Korg MONOLOGUE - Restoring Korg Monologue Factory Settings

49
Restoring the Factory settings
Youcanrestorethemonologue’spresetProgramsandglobalseingstotheir
originalfactory-setstateatanytime.
1.
Begin with the monologue turned O.
2.
While holding down the WRITE buon and the EXIT buon, turn the
monologue On.
“FACTORYRESET”willbeindicatedinthedisplay.
3.
Turn the PROGRAM/VALUE knob to select the items you wish to reset
to the factory default seings.
PRESET:RestoresthepresetPrograms(Programs1–80)totheirfactory-set
defaultseings.
 ThiswillreplacetheexistingpresetProgramswiththefactory-set
defaultPrograms.IfyouwanttokeeptheexistingpresetPrograms
beforehand,presstheWRITEbuontosavethepresetstotheuser
Programs(Programs81–100).
GLOBAL:RestorestheGLOBALseingstotheirfactorydefaultseings.
ThisalsoincludesanyfavoriteProgramsthatyouhaveregistered.
ALL:RestoresthepresetPrograms(Programs1–80),Programs81–100,and
GLOBALseingstotheirfactory-setdefaultseings.
 Usecaution,asthiswillreplacealldatawiththefactory-setdefault
seings(whichwilleraseyouruserPrograms).
4.
Press the WRITE buon.
Thedisplaywillindicatethemessage“Areyousure?”.
5.
Turn the PROGRAM/VALUE knob to select “Yes”, and press the WRITE
buon.
Thefactory-setdefaultdatawillbereloaded,andthemonologuewillbe
restoredtoitsfactorydefaultstate.
TIP
PresstheEXITbuon,orselect“No”usingthePROGRAM/VALUE
knobandpresstheWRITEbuontocanceltheoperation.
 Neverturnothemonologuewhiledataisbeingloaded.