23
Step Recording
1.
Press the REC buon in the SEQUENCER section while the sequencer is
stopped.
“STEPREC”and“STEP1”willbeindicatedinthedisplay.
Ifthesequencehasalreadybeenrecorded,thenotenameswillbeindicated
inthedisplay.
TIP
Selectthestepyouwishtoedit.Forinstance,usebuon3toselect
step3.
2.
Use the keyboard, REST buon and other controls to edit the notes.
Whenyourecordanote,rest,ortieinstepmode,thedisplaywillautomati-
callymovetothenextstep.
Recording notes
Thenotenameforthekeysyoupressonthekeyboardwillbeindicatedin
thedisplay.Checkthenotenameinthedisplay,andifitiscorrect,release
yourngertorecordthatnoteandtomovetothenextstep.
Ifthenotenameisnotcorrect,justplaythecorrectkeywhilecontinuing
toholddownthewrongkey.Checkthenoteindicatedinthedisplay,and
takeyourngerothekeyboardtomovetothenextstep.
TIP
ThenotelengthduringrecordingisdeterminedbytheDefaultGate
TimevaluethatissetintheSEQEDITmode.IfyouturnthePRO-
GRAM/VALUEknobwhileplayingthekeyboard,thegatetimefor
onlythenote(s)youplayedwillbechangedwhenrecording.
Recording a rest
YoucanrecordarestbypressingtheRESTbuon.
Recording a tie
PresstheRESTbuonwhileholdingdownakey.Thenotewillbetiedto
thenextnoteandrecorded.
3.
When the set number of steps have nished recording, step recording
will automatically end. Pressing the REC buon at any step during re-
cording will stop the step recording at that step.
TIP
ThenumberofstepsissetforeachProgram,andyoucanchange
thenumberofstepsusingtheStepLengthfunctionintheSEQ
EDITmode.Fordetails,referto“StepLength”(p.35).Turnthe
PROGRAM/VALUEknobduringsteprecordingtochangetheStep
Length.
TIP
Pressbuons1–16whileholdingdownSHIFTtoswitchtheactivestep
ONorOFF.Sequencerplaybackorsteprecordingwillbeskippedfor
stepsonwhichtheactivestepisturnedOFF.