Korg MONOLOGUE - Program Edit Mode: Name, Initialize, and Level; Button 9: Program Name Creation; Button 11: Initialize Program

34
Cuto Velocity [0%...100%]
Specieshowthevelocity(keyboardplayingdynamics)willaectthecuto
frequency,allowingloudernotestoappearbrighter,etc.
0%:Velocitywillnotaectthecutofrequency.
50%:Velocitywillaectthecutofrequency,butatonlyhalftheamountpro-
ducedat100%.
100%:Playingthekeysharderwillincreasethecutofrequency,whileplaying
thekeyssoerwilldecreasethecutofrequency.
Amp Velocity [0...127]
AmpVelocityisusedtospecifyhowmuchthevolumewillchangeaccording
tothekeyboardvelocity.
0:Thevelocitywillnotaectthevolume.
Thelargerthevalue,themoreeectthatkeyboardvelocitywillhaveonvolume.
Program Level [−25...+25]
ProgramLevelallowsyoutoadjustthevolumeofaProgramrelativetoother
Programs.
Increasingthisvaluewillmakethevolumelouder.
Button 9 (PROGRAM NAME)
YoucancreateaProgramNameupto12charactersinlength.
RotatethePROGRAM/VALUEknobtoselectthedesiredcharacter,thenpress
buon1tomovethecursortothenextposition.
Button 11 (INITIALIZE)
ThisbuoninitializesthecurrentProgram.
TurnthePROGRAM/VALUEknobuntil“PressWRITE”isindicatedinthedis-
play.TheWRITEbuonwillblink.
PresstheWRITEbuontoinitializetheProgram.Thedisplaywillindicatethe
message“Initialized”.