Korg X5DR AI2 SYNTHESIS MODULE - Page 131

Reference Guide
118
Serial Placement
With the Serial placement, buses A and B are sent to Effect1, Effect2, then output from L/MONO
and R. Buses C and D are mixed with the output of Effect1, sent to Effect2, and then output.
Buses C and D allow you to avoid applying Effect1 to a sound, or to apply Effect1 to a specific
sound and then apply Effect2 to all sounds.
Parallel 1 Placement
With the Parallel 1 placement, buses A and B are sent to Effect1, then output from L/MONO and
R. Buses C and D are sent to Effect2, mixed with the output of Effect1, then output.
Parallel 2 Placement
With the Parallel 2 placement, buses A and B are sent to Effect1, then output from L/MONO and
R. Buses C and D are sent to Effect2, mixed with the input to Effect1, then output.
Parallel 3 Placement
Effect 1 Effect 2
Pan
Send
Send
Pan 3
Pan 4
B
A
C
D
L/MONO
R
Program,
Combination,
or Multi
Effect 1
Effect 2
Pan
Send
Send
Pan 3
Pan 4
B
A
C
D
L/MONO
R
Program,
Combination,
or Multi
Effect 1
Effect 2
Pan
Send
Send
Pan 3
Pan 4
B
A
C
D
L/MONO
R
Program,
Combination,
or Multi
Effect 1
Effect 2
Pan
Send
Send
Level 1-L
Level 2-L
B
A
C
D
L/MONO
R
Level 1-R
Level 2-R
Program,
Combination,
or Multi