②
During Installation: Don't pull wires hard when arranging cables.
Before powering the device on, please ensure that all cables are
connected correctly and all connecting ports are plugged in completely..
③ After Installation: If the camera’s functions can work well before
installation, but they CAN’T work after installation. It may be problems
with installation. Please check cables and its connection ports.
④ Don’t destroy or modify the original wires. If cables are damaged
during installation, cables MUST be replaced.
Scan the QR Code to CONTACT US
How to hide power cable inside your car dashboard?
Many people on YouTube have already demonstrated how and where to
arrange power cables in cars. You can view one of the possible ways in
the following link (NOT recorded by us): https://youtu.be/xwD8Ilk-MHU
Or Scan the QR Code to watch
2 Installation Steps
NOTE: MUST check the functionality of device and its accessories
before installation. If there is are problems, CONTACT US!
2.1 Install the Dash Cam
① Turn the camera off and insert a memory card into the TF card slot,
then format manually the TF card on the camera (see page ).
②
Select a mounting position on the front windshield and clean it with
To Next Page
Loading...
