Photo Mode
Playback Mode
With the device powered on, long press (Menu) Button for at least
3s to switch the 3 modes.
Note: Modes CAN’T switch when camera is recording. Stop recording first.
1 Video Mode
In Video Mode, you can record and lock videos, which will be saved in
the inserted memory card.
1.1 Record Videos
(1) Record Video Automatically
If you have inserted and formatted a TF card in this camera, when you
turnit on, it accesses Video Mode and start recording by default.
(2) Record Video Manually
In video mode, when the camera is not recording, short press
(Power/OK) Button once to Start recording.
(3) Stop Recording a Video
When the camera is recording, short press (Power/OK) Button
once to Stop recording.
1.2 Lock Videos
(1) Lock Videos Automatically:
While driving, if the G-sensor has been set to be Low/Middle/high, the
current video segment will be LOCKED automatically when there is an
impact to the car and the impact reaches the set sensitivity of G-sensor.
(2) Lock Videos Manually/Automatically:
During recording, if the flashing indicator on the upper left corner of
screen is red, short press (Menu) Button once to LOCK current
video manually and the flashing indicator turns to be Yellow.
(3) Un-lock Videos:
During recording, if the flashing indicator on the upper left corner of
screen is yellow, short press (Menu) Button once to UN-LOCK the
current video and the flashing indicator turns to be Red.
Note: Locked videos will be archived in “Front_emr” and “Back_emr” files in
To Next Page
Loading...
