Kramer 8115

BA 35203_04 * 3.0 * 35203_04_05_Bedienung.fm 5-37
Operation 5
Hydraulic control circuits/plug couplings (overview)
The following control circuits and hydraulic connections are available on
the machine depending on equipment.
See following pages for instructions on how to operate the separate
control circuits and hydraulic connections.
KRAMER quickhitch plug couplings (standard)
Plug couplings for front additional control circuit
Plug couplings for rear additional control circuit (option)
Fig. 138
B A
Control circuits
Hydraulic
connections
For operation,
see page
3rd control circuit
A + B 5-40
Continuous operation of 3rd control
circuit (option)
E
B CA
D
Fig. 139
Control circuits
Hydraulic
connections
For operation,
see page
Front plug coupling (return without
pressure)
A
5-44
Front plug coupling (pressure) B
Plug coupling (leak oil line) C
Changeover tap for front or rear plug
couplings B
D
Front plug coupling for additional
functions
E 5-47
Fig. 140
G
H
Control circuits
Hydraulic
connections
For operation,
see page
Rear plug coupling (return without
pressure to reservoir)
G
5-48
Rear plug coupling (single-action)
H