7-6 BA 35203_04 * 3.0 * 35203_04_07_Wartung.fm
7 Maintenance
Lubrication
12, 3
()
(Note: lubricate more frequently when in
heavy-duty operation!)
Service
centre
User/operator Service centre
Delivery
inspection
Maintenance work
(daily)
Every 20 o/h
“A”
1st Inspection
at 100 o/h
“B” 2nd Inspection
then every
500 o/h
“C”
every 1500 o/h
once a year
Hinges, joints (for example door arresters) ●● ● ●
Rear axle oscillating bearing ●
●● ● ●
Front and rear axle planetary drive bearings
(left and right)
●
●● ● ●
Trailer coupling – joint (option) ●
●● ● ●
Loader unit – see “Lubricating the loader unit” on page 7-26
Lift chassis bearing ●
● ●●●
Tilt rod bearing ●
● ●●●
Rocker arm bearing ●
● ●●●
Lift cylinder bearing ●
● ●●●
Tilt cylinder bearing ●
● ●●●
Quickhitch: bearing on lift frame ●
● ●●●
1. Observe the manufacturer’s indications for lubrication of the attachment!
2. Have the 1st inspection at 100 hours of operation and the 2nd inspection at 500 hours of operation performed by an authorized service center otherwise
warranty claims will not be acknowledged
3. More frequently when the machine is used for extremely heavy work. The “Central lubrication system” option is recommended in this case.
To Next Page
Loading...
